Use and Care Manual

Q: Is the FLEX GLUE™ adhesive the same in both sizes?
A: Both FLEX GLUE’s have amazing instant grab! Our pro formula has even more instant grab to tackle the biggest jobs!
Both FLEX GLUE’s dry in approximately 24-48 hours and will reach maximum strength in 7 days!
Q: What temperatures will FLEX GLUE™ withstand?
A: FLEX GLUE™ can withstand a wide range of temperatures, ranging from -40°F up to 200°F.
Q: What temperatures can FLEX GLUE™ be applied in?
A: FLEX GLUE™ remains easy to dispense between 0° - 150°F.
Q: How do I clean up after using FLEX GLUE™?
A: Clean with a dry cloth. Residues can be removed with isopropyl alcohol.
Q: Can I use FLEX GLUE™ on drinking water, rain barrels, fish tanks etc.?
A: FLEX GLUE™ has not been tested for use on potable water sources.
Q: How many linear feet can I get out of one 6oz squeeze tube or one 10oz pro cartridge of FLEX GLUE™?
A: Depending on the thickness of the bead, one 6oz squeeze tube will provide up to 30 linear feet and one 10oz pro
cartridge will provide up to 50 linear feet.
Q: Can I apply FLEX GLUE™ overhead or on vertical surfaces?
A: Yes, FLEX GLUE™ can be applied on overhead and vertical surfaces and will not sag, drip or run.
Q: How long does it take for FLEX GLUE™ to reach maximum bonding strength?
A: FLEX GLUE™ gets stronger over time and reaches maximum strength in 7 days!
Q: Can I remove FLEX GLUE™ once its dry?
A: FLEX GLUE™ can be removed with sharp tools similar to a chisel, however, it may not be possible to separate bonded
materials with out damaging the surfaces.