Owner Manual

3 / 4

Step 3:

Place the assembled parts on the Base (K), and fix all

4pcs Posts using 4pcs Bolt (AA) and Flat

Washer (BB).Tightened all Bolts now with Wrench

(DD)

(

Do not over tighten (to avoid stripping them).

Step 4:

ttach Door Holder (I) to Door (G) through Door (G),

and Slice (H), then attach it with Nut (CC) as shown in

above.

Step 5:

Put

Chimney (B) on Chimney Top (A), use 2pcs Bolt

(AA) and Flat Washer (BB), locking from inside of

Chimney (B) and tighten them. After assembling, turn

Chimney (B) to be 180 degree, keep Chimney be upper.

Step 6:

Put

Chimney (B) on Upper Base (C). Open the door and put

Fire Bowl (J) in Base (K). Put Poker (L) and Cover (N)

nearby.