Owner Manual

ManualsBrandsFleur De Lis Living ManualsAll Outdoor Fireplaces & Fire PitsSofie Steel Wood Burning Outdoor Fireplace

1 / 4

ASSEMBLY INTRUCTION

Cautions:



Keep all children and pets away from assembly area. Children and pets should be supervised while product is

being assembled.



This unit is heavy, at least two people are recommended for safe assembly.



Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.



When assembling and using this product, basic safety precautions should always be followed to reduce the risk of

personal injury and damage to equipment. Please read all instructions before assembly and use.



This fireplace is intended for outdoor use only. Do not use on wooden decks.



This outdoor fireplace is intended to burn wood logs only. Do not burn coal, leaves, or other combustible materials

in the fireplace.



The fireplace is hot. Use with caution. Do not touch the hot fireplace with bare hands.



Never leave the burning fireplace unattended, and always extinguish the fire completely before leaving the fire

bowl. Do not use near flammable or combustible objects or materials.



When the fireplace is in use, the handle on the mesh screen can reach extreme temperatures that can cause serious

jury to an unprotected hand. Use a poker or an appropriate heat resistant glove or pad when handling.



Do not use the fireplace as cooking appliance. The fireplace is not designed for grilling food.



Check local fire regulations and municipal by-laws for safe use.

WARNING: The protective fabric cover shall not be used while the unit is in operation and shall not be installed

until this unit is cool.

Summary of content (4 pages)

PAGE 1
ASSEMBLY INTRUCTION Cautions:            Keep all children and pets away from assembly area. Children and pets should be supervised while product is being assembled. This unit is heavy, at least two people are recommended for safe assembly. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
PAGE 2
PARTS LIST PART# DESCRIPTION QTY A Chimney Top 1 B Chimney 1 C Upper Base 1 D Side Mesh 2 E Rear Board 1 F Post 4 G Door 1 H Slice 1 I Door Holder 1 J Fire Bowl 1 K Base 1 L Poker 1 N Cover 1 HARDWARE PACK PART# DESCRIPTION QTY AA Bolt M6x15 26 BB Flat Washer M6 26 CC Nut M6 1 DD Wrench M6 1 ASSEMBLY STEPS Step 1: Step 2: Place Upper Base (C) be upside down on a flat and Place Rear Board (E), Side Mesh (D) and Door (G) clean surface, then assembl
PAGE 3
Step 3: Place the assembled parts on the Base (K), and fix all Step 4: 4pcs Posts using 4pcs Bolt (AA) and Flat Attach Door Holder (I) to Door (G) through Door (G), Washer (BB).Tightened all Bolts now with Wrench and Slice (H), then attach it with Nut (CC) as shown in (DD) (Do not over tighten (to avoid stripping them). above. Step 5: Put Chimney (B) on Chimney Top (A), use 2pcs Bolt (AA) and Flat Washer (BB), locking from inside of Step 6: Chimney (B) and tighten them.
PAGE 4
Care & Maintenance Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. When not in use, we recommend the use of patio furniture covers, or similar protection (not included). Steel components of garden accessories and furniture are treated with rust inhibiting paint.