Care & Instruction Manual

Place top assembly into middle reservoir (D) and
twist it clockwise to secure.
Attach pump (J) to the rubber hose.
Top assembly
Rubber
hose
D
J
Place pump access door (H) to
cover entry of lower column (C).
Fill reservoirs (B, D, F) with
distilled water. Water level should
door when fountain is running.
Connect the light connectors (K)
and (L) and screw the cap tightly.
Plug light transformer (K) and
pump (J) into outlets and turn
light on at switch.
Use shims (I) to level the fountain
as necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7
ASSEMBLY INSTRUCTIONS