User Manual

With the CoreXY structure adopted, Guider 3 supports
high-speed printing of up to 250mm/s, realizing
efficient production. Under the same conditions
except speed, one Guider 3 can save about 30%-50%
of the printing time.When in the small batch production
mode, quick delivery can be completed, which greatly
improves the efficiency.
Faster Delivery Capacity Offering
Higher Production Efficiency
Material: PLA; Layer Thickness: 0.2 mm
Model Size: 136x136x27 mm; Infill Density: 40%
*Example
Example of the printing speed
The lightweight equipment and the powerful production management system ensure 24/7 stable
and continuous printing during the production and development process.
FlashPrint 5 enables
multi-machine joint
control and integrated
device management in
small batch production.
Integrated Equipment
Management System
With the camera equipped,
the printing process and
status can be monitored
in real time easily through
FlashPrint 5 and UI interfaces.
Real-time Monitoring
of the Printing Process
It can save the printing
state in the event of an
unexpected power failure
and continue printing
after the power is restored.
Power Loss
Recovery System
The 320℃ high-temperature
extruder is compatible with
ABS/PLA/PC/PA/HIPS/ASA
PETG/PA-CF, etc., and
supports third-party
materials, suitable for
various applications.
Open Material
System
For Small Batch Production
Guider IIs
60 mm/s
3h 44min
100 mm/s
2h 38min
250 mm/s
2h 18min
Guider 3 Guider 3