Replacement Part List

44
a. If PolarCloud is in an intranet (that is, the printer and PC connect to the same router), the video
is shown, and the state of printing can be displayed in real time. If PolarCloud is in an extranet,
the pictures are shown (in case of printing, a picture is sent per 20s; in case of not working,
a picture is sent per 60s).
b. When the camera is turned on or off, the lower computer will turn off and reconnect PolarCloud,
so PolarCloud will not respond for a while. The recovery time depends on the state of network.
c. After the camera is operated through the Cloud, the lower computer will set the camera to be in
the manual mode; if the automatic mode is to be recovered, please set manually (Tools->
Settings (on the second page) -> Camera).
Auto Mode
Manual
2.5.5. Error Handling
1. When the camera is damaged or not inserted, the error
is reported in case of turning on the camera. At this point,
the lower computer will automatically set the camera to
be in manual mode and the camera is turned off.
2. If the lower computer does not connect to PolarCloud and
the printer is deleted from the Cloud, the error is reported;
at this point, the factory settings can be restored in order to
solve the problem. After the lower computer connects to the
printer and the printer is deleted from the Cloud, the sign-up
needs to be done again according to the foresaid steps.
PolarCloud
Account：
PIN：
Save
Camera has not be found
Confirm
error
Confirm
Notices