Replacement Part List

37
2.5 The Guide of Using Camera
Auto Mode
Idling Printing
Manual Mode
Auto Mode
Manual Mode
Build
Tools
Filament
Build
Tools
Filament
Camera User Manual
2.5.1. The switching can be controlled by the lower computer
Camera and USB Disk use the same interface, so the use of Adventurer 3's camera is different
from that of other models. The use of Adventurer 3's camera and the use of Adventurer 3's USB
Disk are incompatible (that is, only one (camera or USB Disk) can be used in the same time).
The switching between camera and USB Disk can be realized through the Cloud or the lower
computer. The use of Adventurer 3's camera is introduced as follows.
In respect of the use of Adventurer 3's camera, there are two modes, that is automatic mode
(default mode) and manual mode. The route is (Tools->Settings (on the second page) ->
Camera), the user can click the “Camera” button to enter the relevant page.
After the camera is turned on successfully, the icon of camera
will appear in Status Bar. After the camera is turned off, the icon
of USB Disk will appear in Status Bar in case of successful insertion
of USB Disk.
Automatic Mode: When the printer is working (such as
the printer is printing the files), the camera is turned on
and USB Disk is turned off. When the printer is not working,
the camera is turned off and USB Disk is turned on.
Manual Mode: The switching
between camera and USB Disk
can be controlled by the user
at will.