Replacement Part List

24
After generating the Gcode file, you can transfer it to your Adventurer 3 with different
network methods. If use USB stick to print, please insert your USB stick with target .g/.gx file
to your Adventurer 3, there will be no need to set new network.
Method 1 :
WiFi Connection
1. Tap [Tools]--Tap [Network]--Tap [WIFI] ;
2. Choose a network and input the password.
3. Open the FlashPrint software, click [Print], then click [machine type], select [Flashforge
Adventurer III]. Then click [connect to the machine].
2.4.2 Model File Transfer
Network
Preheat
Setting
About
WiFi
Hotspot
Cloud
Ethernet
WiFi
Choose a network
Flashforge
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3
< <<
abc
123
%#
1 2 3 4 5
6 7 8 9
0
，
.
_
WiFi
Choose a network
Flashforge
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3
<