Replacement Part List

20
Factory Setting: Delete all data in internal memory, return the printer to factory setting.
Buzzer: To turn on/off the buzzer.
Update: To upgrade the newest firmware.
Shows the basic information about the printer.
Notice: When contacting after-sales support, please give your Serial No to after-sales
engineer, which is showed in the [About] interface.
2.3.2.4 About:
1/3
<
Machine Type:
Serial No:
RegisterCode:
Adventurer 3
123456
XXXXXX
Polar Serial No:
XXXXXX
Firmware Version:
v1.03-1.1
2/3
<
Build Volume:
Usage counter:
IP Address:
150 x 150 x 150
12 hours
10.90.243.184: 8899
<
3/3
<
WiFi MAC:
02:00:00:00:11:66
< <
Update
Buzzer
FactoryReset
Start
Factory Setting
Delete all data
in internal memory
ok
Restored to factory setting
Completed!
3/3
< <