User Guide

Finder User Guide | www.flashforge.com 400-699-1063

6-19

If successfully connected, you will see the following red mark.

②

Connect Finder with your PC under STA mode

a. Tap [Tools]-[Setting]-[WiFi]-[WiFi ON] to turn on the WiFi of Finder and

connect your PC and Finder with the same WiFi network.

b. Click [Print]-[Connect Machine] on FlashPrint. Then the following dialog

box pops up. You need to select “Wi-Fi” in Connect Mode. Enter into the IP Address

shown on the Finder t ouch screen and then click [Connect].

10.10.100.254:8899 may not be the correct IP address according to your

printer present status.

If successfully connected, you will see the following red mark.

③Disconnect Finder

Click [Print]--[Disconnect] to disconnect your PC and Finder.