User Guide

Finder User Guide | www.flashforge.com 400-699-1063

⑥

Delete

Select the object and delete the object through the following two methods:

Method 1: Click [Edit]--[Delete]

Method 2: Press the shortcut Delete

⑦

Auto Layout All

Click [Edit]--[Auto Layout All] a fter loading one or more than one models, all

models will be placed automatically as automatic placement rule.

⑧

Repair Models

Click [Edit]--[Repair Models] to repair models.

⑨

Supports

Click [Edit]--[Supports] to enter supports setting interface.

6.2.13 Print Menus

①

Connect Machine

You can connect the Finder with your PC via a USB cable or WiFi.

Note: The machine icon on the bottom right displays the connection status:

Connected

Disconnected

Method 1：Connect Via USB Cable

a. Connect your Finder with your PC via an USB cable.

b. Turn on your Finder and start FlashPrint.

c.Click [Print]--[Connect Machine], then select USB in the [Connection Mode]

option and select machine you want to connect in [Select Machine] option. If you can

not find your machine, click the [Rescan] button to scan your machine and select it.