FL3DFFGNPRO User Manual

１５
Input the following target values: 220°C for the extruder and 115°C for the heating platform. After entering the values,
the platform will start to warm up. When the extruder temperature reaches 50°C, the cooling fan will be activated and
the current temperature value will display to the right as shown below.
6 Filament
To make the process of feeding or withdrawing the filament easy, please follow the next few steps carefully:
After inserting the filament into the feeding hole, do not push it further until the extruder temperature reaches 200°C
or more. Once the machine reaches this point, you will feel the filament being pulled into the extruder head.
6.1 Install Filament
First, remove the filament guide tube from the extruder head.