User manual

Finder User Guide | www.flashforge.com 400-699-1063
52
②
Connect Finder with your PC under STA mode
a. Tap [Tools]-[Setting]-[WiFi]-[WiFi ON] to turn on the WiFi of Finder and
connect your PC and Finder with the same WiFi network.
b. Click [Print]-[Connect Machine] on FlashPrint. Then the following dialog
box pops up. You need to select “Wi-Fi” in Connect Mode. Enter into the IP Address
shown on the Finder touch screen and then click [Connect].
If successfully connected, you will see the following red mark.
③Disconnect Finder
Click [Print]--[Disconnect] to disconnect your PC and Finder.