User manual

Finder User Guide | www.flashforge.com 400-699-1063
29
4-9
（
4-9
）
After the extruder’s temperature reaches 220℃, the printer will sound a beep to
prompt you to load the filament into the extruder.
4-10
（
4-10
）
Press the spring presser,and then insert the filament into the extruder at an
upright angle. Then the filament will be drawn through the extruder. Do not tap
[Cancel] until the filament load the extruder steadily.
4.4 Unloading Filament
4-11