User manual

Dreamer 3D Printer Quick Start Guide Power Cable USB Cable

SD Card

Kit Contents

Parts with are packed in tool box.

This g uide on ly appl ys to Dre amer 3D p rinte r of Flas hforg e 3D Techn ology

Quick Start Guid e

Notes

1.Don't strip the yellow film of the heating board, which is high temperature resistant tape, making object stick on platform easily.

2.Don't remove the tape that wrap around the nozzle, which is made from ceramic fibre to stabilize the temperature of the nozzle,

then promote fluency and stability of filament output.

3. If print with PLA filament, please remove the top cover and open the front door to ventilate well for a better printing performance.

Warning

1. High Temperature! Platform may have been heated before, make sure it already cools down before inner operation.

2. Moving parts may cause injury of crushing and scratch, keep your hands naked during operation.

Filament Spool*2

Spool Lock*2

Turbofan Baffle Tool Box

Screw Box

Sensor Cable

Tweezer

Scraper Graver

Do Not Touch

请勿触摸

CAUTION

注意

1.Extruder hot during operation.

使用过程中喷头会发热。

2.Heating plate hot during operation. Allow surface to cool before servicing.

使用过程中加热平台会发热，待平台表面冷却后再操作。

Build Tape Leveling Tool

Filament-Rolle (2x) Spulenverriegelung (2x) Turbolüfter-Zuleitung SD-Karte Werkzeugkiste

* Schraubenbox * Pinzette * Schaber * Stichel * Sensorkabel

Packungsinhalt

Teile, die mit einem * markiert sind, sind in der Werkzeugkiste zu ﬁ nden.

Dreamer 3D Drucker Kurzanleitung Netzkabel USB-Kabel Druckplatten-Schutztape Leveling Card

(Justierungshilfe)