SDS

SAFETY DATA SHEET
Lead Flashing
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
02/05/2015
EN (English US)
3/5
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for Safe Handling
Precautions for Safe Handling: Use Gloves when using this product.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed
areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Comply with applicable regulations.
Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from
Incompatible materials.
Incompatible Products: Strong acids. Strong bases. Strong oxidizers.
7.3. Specific End Use(s)
Industrial, Commercial, Residential
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
For substances listed in section 3 that are not listed here, there are no established exposure limits from the manufacturer,
supplier, importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), or OSHA (PEL).
Lead (7439-92-1)
USA ACGIH
ACGIH TWA (mg/m³)
0.05 mg/m³
USA NIOSH
NIOSH REL (TWA) (mg/m³)
0.050 mg/m³
USA IDLH
US IDLH (mg/m³)
100 mg/m³
USA OSHA
OSHA PEL (TWA) (mg/m³)
50 µg/m³
8.2. Exposure Controls
Appropriate Engineering Controls
:
Ensure adequate ventilation, especially in confined areas. Emergency eye wash
fountains and safety showers should be available in the immediate vicinity of any
potential exposure. Ensure all national/local regulations are observed.
Personal Protective Equipment
:
Protective goggles. Gloves. Protective clothing. Insufficient ventilation: wear
respiratory protection.
Materials for Protective Clothing
:
Chemically resistant materials and fabrics.
Hand Protection
:
Wear chemically resistant protective gloves. If material is hot, wear thermally
resistant protective gloves.
Eye Protection
:
Chemical goggles or safety glasses. For safe furnace work: Safety glasses. Face
shield.
Skin and Body Protection
:
Wear suitable protective clothing.
Respiratory Protection
:
If exposure limits are exceeded or irritation is experienced, NIOSH approved
Thermal Hazard Protection
respiratory protection should be worn.
: Not Applicable
Environmental Exposure Controls
Consumer Exposure Controls
: Do not allow the product to be released into the environment.
: Do not eat, drink or smoke during use.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on Basic Physical and Chemical Properties
Physical State
:
Solid
Appearance
:
Bluish-gray soft metal
Odor
:
No data available
Odor Threshold
:
No data available
pH
:
No data available
Evaporation Rate
:
No data available
Melting Point
:
621 °F (327 °C)
Freezing Point
:
No data available
Boiling Point
:
3164 °F (1740 °C)