User Manual

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing Vintage LED PAR 64 COB SHORT Mk2 300W RGBWA. For safety reasons and
to ensure the trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of
accidental electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect
the device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
6. Always use steel security cable to attach the device to a stable structure
7. Do not connect power supply to more than 3 devices in series.
3 PRODUCT INFORMATION
The device is equipped with high-quality, bright COB LED with Red, Green, Blue, White and additional
Amber chips. Unique design, high quality and high durability make this device a great tool for both power
users and those, who value simplicity and reliability.
The ergonomic double bracket (included) facilitates the use of the device in any condition. In order to
expand the range of mounting options, the holder has an additional mounting holes.
The electronics is made of high quality components and offers several features such as:
3.1 Features
• 16-bit dimming resolution
• Various dimming curves for smooth dimming in 8-bit mode
• Dim delay (light bulb simulation)
• Full DMX signal regeneration
• Electronic protection against overheating
• THEATRE or DISCO cooling volume modes.
• Permanent color correction
• Native support for optional wireless DMX module
3.2 Specification
• Power consumption: 300W
• Power supply voltage: 100 - 245V
• Voltage frequency: 50/60Hz
• Diode type: COB 5in1
• Number of diodes: 1
• Diode power: 300W
• Display: Color LCD 1,8”
• Color: RGBWA
• Beam angle (min): 37°
• Beam angle (max): 37°