User Manual
The connection is performed using
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100~245V 250W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s not
enough, the lamp will be dark. Please restart it after turning off light
for 20 minutes until full-cooling. Frequent switching will reduce the
life span of lamps and bulbs; intermittent using will improve the life
of bulbs and lamps.
User Manual •Instrukcja Obsługi
Advanced
Photometric Data
up up up down down down
To verify press enter.
DISTANCE
lx
6177
1501
637
angle
9°
9°
5m
10m
15m
the size of
the light spot
ø 207 cmø 95 cm ø 184 cm