User Manual
Please keep this User Manual for future
user, be sure that they also receive this
instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
but always by taking its base.
Don’t operate it where the temperature is
higher than this.
WARNING! The Moving Head 150W 3in1 has a powerful pan motor. The torque reaction when
on a surface. Do not apply power to the Moving Head 150W 3in1 unless the baase is securely
fastened to a surface or to rigging hardware.
WARNING!
clockwise.
WARNING!
of clamp that does not completely encircle the structure when fastened.
WARNING!
See Figure 2. The Moving
Head 150W 3in1 lens can focused the sun's rays, creating a potential fire hazard and causing
damage.
IMPORTANT! Moving Head 150W 3in1,
as intense illumination can damaged the display.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation and
there might be a hazard of electric shock.
To prevent or reduce the risk of electrical
or moisture.
The housing must be replaced if they are
visibly damaged.
2. SAFETY INFORMATION
1. INTRODUCTION
Moving Head 150W 3in1
WARNING!
User Manual •Instrukcja Obsługi
Figure 2.