User Guide

Descriptions of the Sequence Patterns Already Pre-Programmed on the 3 Track Smart Chaser
The 3-Track Smart Chaser comes with 16 different sequences to choose from, including 5 sequences for 2
track mode and 11 sequences for 3 track mode.
The label below shows which sequences are included with the 3-Track Smart Chaser.
Here are descriptions of each of the included base patterns.
Visit our website at www.FlashTrackLighting.com and click on Products and Pricing, “See Our Pre-Programmed Chase
Patterns” to see animated examples of what each of these patterns can do.
3-Track Smart Chaser Pattern Descriptions:
• Chase: Sequentially turns on each track, one at a time
• Wave: Turns lights on and off in a back and forth
motion, like an ocean wave
• Slow Chase: A slow chase pattern, with a speed range of
2-6 seconds per step
• Slow Wave: A slow wave pattern, with a speed range of
2-6 seconds per step
• Chase with Delay: Chase pattern with a 3 times longer
delay on step 1
• Wave with Delays: A wave pattern with 3 times longer
delays on step 1 and step 3
• Chase with Blank: A chase pattern that adds a “blank”
delay (a delay with all lights off)
at the end of step 3, after which the
pattern then repeats
• Negative Chase: Reverse of the chase pattern –
sequentially turns 1 track off at a time,
while keeping all other tracks on
• Build-Up: Sequentially turns each track on, keeping it on
until all tracks are on, then turns all tracks off together
• Speller: Build up that ends with all tracks flashing on and off together 3 times
• Multi-Sequence: A 20 second loop with 8 different, 1 to 3-second-long chase patterns.
(See next page for a detailed explanation of what multi-sequence does and how you can use it.)
3TSC-10 Manual p5