Release Notes

ATOM UAV MANUAL
Date:
2022
-
01
-
04
Version: 1.3
Page: 27 of 39
FLARM Technology
Ltd
Hinterbergstrasse 15
CH-6330 Cham
Document Number:
FTD-088
9 Troubleshooting and Servicing Information
Many problems and issues can be related to one of the following causes:
 Improper antennas or antenna cables used
 Incorrect antenna or antenna cable installation
 Incorrect configuration
 Aging or breaking of components under normal or abnormal wear (device,
cables, antennas, connectors, connector pins)
 No valid GNSS position (e.g., aircraft is inside)
Configure the system using FLARM Hub (see Section 4.1).
If an error is indicated, a list of error codes can be found in Appendix A. Many
issues can also be resolved by consulting the FAQ:
https://support.flarm.com/
For support requests it is recommended to create a support package according to
Section 4.4.
Atom UAV may only be repaired by FLARM Technology Ltd or its authorized service
partners.