Release Notes

ATOM UAV MANUAL

Date:

2022

Version: 1.3

Page: 17 of 39

FLARM Technology

Ltd

Hinterbergstrasse 15

CH-6330 Cham

Document Number:

FTD-088

To use radio diversity, configure both the primary and secondary. Inappropriate or

incomplete configuration may lead to loss of function or multiple targets being

transmitted from the same vehicle.

The secondary device requires the reference to the primary device. This reference

is the serial number of the primary device, as can be found on the sticker on the

device or in the web interface, on the “Status” page, under “System”, “Device ID”,

e.g., 26 for the primary with the Device ID FLATMUAVW-000026.

Note: Only devices of the same type can be used in a diversity setup. Specifically,

the OEM variant cannot be mixed with the standalone variant.

Identification of serial number in primary device Setting radio diversity role in secondary device

4.1.2 Wi-Fi & Bluetooth

Wi-Fi and Bluetooth settings and network names can optionally be changed, e.g.,

to make it easier to identify a particular device. The default password (“password”)

must be changed during initial configuration.

Wireless connectivity (Wi-Fi and Bluetooth) can be disabled under configurable

conditions (in-flight, with valid GPS, or after specific elapsed time since power-on).

4.1.3 Configuration Lock

To prevent unauthorized persons from modifying the configuration, the

configuration can be locked by a password. Set a password that is different from

the Wi-Fi password. Users will still be able to access FLARM Hub but will not be

able to change the locked configuration items.