Installation Manual

POWERFLARM FUSION
INSTALLATION MANUAL
Date: 2020-11-27
Version: 1.1
Page: 35 of 40
FLARM Technology Ltd
Hinterbergstrasse 15
CH-6330 Cham
Document Number:
FTD-077
The following FLARM displays have been certified as FLARM Compatible as of the
date when this manual version was published. The approval is valid under the
condition that the limitations listed below are adhered to. The approval is valid
only for the latest display firmware/software that was released on the day this
manual version was published, and any consecutive firmware/software versions.
Manufacturer
Model
Part No.
Limitations
ABOBA
Elektronik
V3+Mm
V3+Mm

Approved for displays
manufactured before
2016-01-01 only.
ABOBA
Elektronik
V4+M
V4+M

Approved for displays
manufactured before
2016-01-01 only.
Butterfly
Avionics GmbH
Butterfly Display 57
B102

Approved for day only.
Butterfly
Avionics GmbH
Butterfly Display External
B101

Approved for day only.
Garrecht Avionik ATD-11 ATD-11 (none)
Garrecht Avionik ATD-57 ATD-57 (none)
Garrecht Avionik ATD-80 ATD-80 (none)
LXNAV FlarmLED+ FlarmLED+ (none)
LXNAV
TrafficView
TrafficView
(none)
LXNAV
TrafficView57
TrafficView
(none)
Moving Terrain
MT VisionAir X
MT VisionAir X ETSO
MTEX/SY-22-00
MTUX/SY-25-00
(none)