Installation Manual

POWERFLARM FUSION
INSTALLATION MANUAL
Date: 2020-11-27
Version: 1.1
Page: 26 of 40
FLARM Technology Ltd
Hinterbergstrasse 15
CH-6330 Cham
Document Number:
FTD-077
3 Technical Specification
Dimensions 119 x 80 x 42 mm
Mass 250 g
Power supply 12–32 V DC ±5%
Current consumption
(no external consumers)
200 mA @ 12 V DC (Peak)
180 mA @ 12 V DC (Typical)
Supply for
external devices
1 x 250 mA @ 3 V DC (D-sub, RJ45)
1 x 700 mA @ 5 V DC (D-sub, USB)
Data Ports
D-sub DE-9 and RJ45
RS-232 connection
NMEA ICD @ 4.8-230 kBaud
Wireless Data
FLARM ICD: Wi-Fi (TCP, WebSocket) and Bluetooth
GDL 90: Wi-Fi
Audio Out AC, 1.7 V peak-to-peak @ 1 kΩ
GPS
SMC connector
External 50 Ω active (4.7 V) antenna
Accuracy ≤ 5 m (typical)
Radio (FLARM)
RP-SMA Connectors (2x)
868 to 869 MHz (SRD860 band) and
902 to 928 MHz (ISM band)
Radio (SSR/ADS-B)
SMA Connector
1090 MHz (RX only)
USB
Connector for USB 2.0 flash drive
FAT16, FAT32, or exFAT; 128 GB max.
Operating temperature -15 to 70 °C
Detection range
>10 km (typical)
Depending on antenna and installation)
Accessories
Internal antennas & cables (included)
Adapter kit for PowerFLARM Core
AV-75 external FLARM antenna