User's Manual

Chapter 8: Powering Dow n the Cabinet
8.1. Po wering Down the Cabi net
1.
Connect a PC to the serial port of the MCU. See Figure 8-1: COM Port on the MCU.
Figure 8-1: COM Port on the MCU
2.
Run a terminal emula tor such as Microsoft Windows Hyper Terminal.
3.
At the Login: prompt, type root and press Enter.
4.
At the Password: prompt, type the root login pa ssword and press Enter.
5.
At the BS_Name#> prom pt, type halt and press Enter.
The system displays the message System Halted followed by the me ssage Press
any key to reboot.
Be careful not to touch any keys or the system will restar t.
6.
Tur n off the DC breakers in reverse orde r to how they were turned on. See Figure 7-9: D C
Circuit Breakers through Figure 7-7: Low Voltage Disconnect.
•PAbreakers
• LNA breake rs
• RRC brea ker
• Battery breaker s
RadioRouter® Base Station Outdoor I nstallation Guide © 2005 Flarion
Flarion Proprietary and Confidential
Page 8-2