Manualshelf

User's Manual

ManualsBrandsFlarion Technologies ManualsElectronicsRadio Router Outdoor Base Station
31323334353637383940
Chapter 7: Pow ering Up the Cabinet
Figure 7-2: DC Power Distribution Panel — Front View
7.1. Powering Up the Cabinet
The cabinet is pow ere d up using the AC circuit brea k ers in the Load Center at the rear of the
cabinet and the DC circuit breakers on the distribution pane l on the f ront of the ca binet.
For this procedure you will need a volt me ter.
1.
Before turning on the power, confirm the AC voltage:
1.a.
Connect the leads of the volt meter across the screws as shown in Figure 7-3: Load
Center 240 VAC Test Points. The voltage across should be 240 VAC.
1.b.
Connect the leads of the volt meter across the screws as shown in Figure 7-4: Load
Center 120 VAC Test Points — Test 1. The voltage across should be 120 VAC.
RadioRouter® Base Station Outdoor I nstallation Guide © 2005 Flarion
Flarion Proprietary and Confidential
Page 7-2