User's Manual

Connecting the Ground Cable

Fasten the lug onto the stud with the nuts provided. Tighten the nuts to 40–50 in-lb

torque.Figure 4-7: Main Ground with Cable shows the ground cable attached to the studs.

Figure 4-7: Main Ground w ith Cable

Connect the other end of the cable to the M aster Ground Bar or other suitable ground sour ce

available a t the installation site.

Note:

Reinstall the Roxtec seal inserts and outer panel after all of the system cables have been routed.

The seal inserts are installed tight against each cable and are held in place when the outer pane l

is installed. Se e Figure 6-4: Cables I nstalled in Cabinet.

Flarion Proprietary and Confidential

Version 1.3

Page 4-7