User's Manual

Chapter 3: Installing the Cabinet
3.3. Mounting the Cabinet to the Co ncrete
Once the cabinet has been moved to its final loca tion, it must be bolted to the concrete.
1.
Align the c leara nce holes in the base o f the cabinet to the threaded holes in the concre te.
2.
Bolt the cabinet to the concrete using 3/8” d ia me ter bolts, 1” minimum length, a nd flat
washers. Use corr osion resistant screws and w asher s.
3.
Tighten the bolts to 180 in-lb +/- 25 in-lb.
Note:
The re ar and side access panels are not replaced at this time. They are replaced after all of the
system c ables have been routed.
RadioRouter® Base Station Outdoor I nstallation Guide © 2005 Flarion
Flarion Proprietary and Confidential
Page 3-6