User's Manual
Table Of Contents
- toc
- Issue Date: 09- 23- 2003
- Overview
- 1.1. Installation Equipment
- Verifying the Site Preparation
- 2.1. Site Preparation Checklist •24 Outdoor BaseStation
- 2.2. Preparing the Floor
- Installing the Cabinet
- Connecting the Power System
- Connecting the Core Network Cables
- Connecting the Antennas
- Powering Up the Cabinet
- Powering Down the Cabinet
- Verifying the Installation
- RadioRouter Outdoor BaseStation Site Preparation Punchlist
- Outdoor BaseStation Installation Punchlist
- tables
Page 18
Chapter 5. Connecting the Core Network Cables
The RadioRouter BaseStation accesses the core network through a T1 connection.
Procedure 5-1 Routing the T1 Cables
1.
Remove the rear access panel above the Roxtec cable entry ports. See Figure 5.1
Access
to T1 Connections — Rear View. Use a 7/8” socket for the hex head bolts.
Figure 5.1 Access to T1 Connections — Rear View
2.
If they have not already been removed, remove the outer panel and seal inserts of the
Roxtec assembly.
RadioRouter
®
BaseStation Installatio n Gu ide — Draft
Version 0.2 - © 2003 Flarion
Flarion Confidential
Page 18