User's Manual
Table Of Contents
- toc
- Issue Date: 09- 23- 2003
- Overview
- 1.1. Installation Equipment
- Verifying the Site Preparation
- 2.1. Site Preparation Checklist •24 Outdoor BaseStation
- 2.2. Preparing the Floor
- Installing the Cabinet
- Connecting the Power System
- Connecting the Core Network Cables
- Connecting the Antennas
- Powering Up the Cabinet
- Powering Down the Cabinet
- Verifying the Installation
- RadioRouter Outdoor BaseStation Site Preparation Punchlist
- Outdoor BaseStation Installation Punchlist
- tables
Page 15
Procedure 4-3 Connecting the Ground Cable
The cabinet must be connected to earth ground at the installation site.
CAUTION:
Failure to properly connect the cabinet to ground could result in
permanent damage to the equipment.
1.
Locate the main ground connection. It is located inside the lower side panel on the lightning
suppression bar next to the antenna connections. See Figure 4.4 Main Ground — Side
View.
Figure 4.4 Main Ground — Side View
RadioRouter
®
BaseStation Installation Guide — Draft
Version 0.2 - © 2003 F larion
Flarion Confidential
Page 15