User's Manual
Table Of Contents
- toc
- Issue Date: 09- 23- 2003
- Overview
- 1.1. Installation Equipment
- Verifying the Site Preparation
- 2.1. Site Preparation Checklist •24 Outdoor BaseStation
- 2.2. Preparing the Floor
- Installing the Cabinet
- Connecting the Power System
- Connecting the Core Network Cables
- Connecting the Antennas
- Powering Up the Cabinet
- Powering Down the Cabinet
- Verifying the Installation
- RadioRouter Outdoor BaseStation Site Preparation Punchlist
- Outdoor BaseStation Installation Punchlist
- tables
Page 10
Procedure 3-2 Lifting the Cabinet
The cabinet can be lifted by a hoist or crane using heavy duty str uctural s traps or chains with
1500 lb load capability. Attach the straps or chains with hooks to the four eyebolts located at the
top of the cabinet. Figure 3.5 Eyebolts for Lifting Cabinet shows the location of the eyebolts.
Note:
Before lifting the cabinet into place, make sure all necessary mounting holes have been drilled in
the c oncrete slab. See Section 2.2. Preparing the Floor.
Figure 3.5 Eyebolts for Lifting Cabinet
RadioRouter
®
BaseStation Installatio n Gu ide — Draft
Version 0.2 - © 2003 Flarion
Flarion Confidential
Page 10