User's Manual

Verifying the Installation

Chapter 10. Verifying the Installation

Verifying the proper installation of the cabinet must be done before the installation can be

considered complete.

Verify that all of the following re quirements are met:

• Clearance re quirements are met — at least 24” front and 6” rear. There must be room to open

the cabinet doors for service .

• The base station is powered up. All the LEDs in Table 8 .1 Power On Expec ted LEDs must

reflect the states listed in the table. The system should rema in in the powered up state. If it is

necessary to power down the base station, do so in accorda nce with the instructions in Chapter

9. Powering Down the Cabinet.

• Correct terminations on all T1 and alarm cables

• No crimps in RF cables

• RF cable markings match those specified in Chapter 7. Connecting the A ntenna Cables.

Flarion Proprietary and Confidential

Version 1.7

Page 10-1