User's Manual
Powering Up the Cabinet
1.
Before turning o n the power, confirm the voltage and polarity:
1.a.
Connect the comm on lea d of the volt m eter to the DC return connector on the power
distribution panel. See Figure 8-2: P ow er Distribution Pane l with Volt Meter
Connections.
1.b.
Connect the positive lead of the volt me ter to the D C powe r connec tor which is
labeled POWER I N.
1.c.
Confirm that the voltage is the expected voltage for this base station.
Figure 8-2: Pow er Distribution Panel with Volt Meter Connections
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 8-3