User's Manual
Systems with Top Mounted Connectors
See Figure 7-6: Top-Mount Antennas, 4–Connector Schematic — Rear View.
ALPHA
SECTOR
TX/RX
BETA
SECTOR
TX/RX
ALPHA
SECTOR
RX ONLY
BETA
SECTOR
RX ONLY
Figure 7-6: Top-Mount Antennas, 4–Connector Schematic — Rear View
7.2.3. Connecting the Antenna Cables
1.
Route the antenna cable from the top and screw mount it to the mating connector. The
connector nut is 1 1/4” hex (across f lats).
2.
Fully seat the connector and hand tighten with an appropria te tool. The connector may be
tightened from either the r ear or the top.
3.
Repeat Steps 1 and 2 for all antenna ca bles.
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 7-7