Manualshelf

User's Manual

ManualsBrandsFlarion Technologies ManualsElectronicsRadio Router Indoor Base Station
51525354555657585960
Chapter 7: Conne cting the Antenna Cables
7.1.3. Connecting the Antenna Cables
1.
Route the antenna cable from the top and scre w mount it to the mating connector. The
connector nut is 1 1/4” hex (across flats).
2.
Fully seat the conne ctor a nd hand tighten with an appropriate tool. The connector may be
tightened from either the rear or the top.
3.
Repeat Steps 1 and 2 for all antenna ca bles.
4.
Reinstall the cable access panel. Make sure t he rubber edging is tight against the cables.
Figure 7-4: Top of Cabinet with Two Antenna Cables Installed shows two antenna cables
installed.
Figure 7-4: Top of Cabinet with Tw o Antenna Cables Installed
RadioRouter Base Station Indoor Installation Guide © 2005 Flarion
Flarion Proprietary and Confidential
Page 7-4