User's Manual

Connecting the Power System
Chapter 4. Connecting the Power System
The RadioRouter base station indoor c abinet requires a conne ction to DC power. This c hapter
contains procedures for routing the power cables an d connec ting to power and ground.
WARNING:
WHEN PERFORM ING ANY TASKS INVOLVING THE P OWER
SYSTEMS, MAKE SURE THAT THE POWER IS NOT LIVE. ALL POWER
OPERATIONS SHOULD BE PERFORMED BY QUALIFIED PERSONNEL
ONLY.
Two different power configurations are available. Each is described se para t ely. The two options
are:
• Systems with a P ower Distribution Unit (PDU)
• Systems with a DC-to-DC Powe r C onver ter
4.1. Routing the Cables
Cables are routed from the top o f the cabinet either through one of the cable entry ports or, if
available, through the cable access opening.
4.1.1. Routing Cables Through the Cable Entry Port
There are two c able entry por ts, one located in eac h of the top front corners as shown in Figure
4-1: Cable Entry Port.
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 4-1