User's Manual

Chapter 3: Installing t he Cabinet
3.
Locate the pallet’s side support brac es. See Figure 3-1: Side Brace and Screws. Unscrew
the braces and remove them.
Figure 3-1: Side Brace and S crews
4.
Open the f ront door of the cabinet. Lift the door upwards and remove the door f rom
its hinges.
5.
Unfasten al l the scr ews on the rear panel and remove the pan el.
Note:
Reinstallation of the rear pane l is optional. If the rear panel is to be reinstalled, make sure that
there is sufficient rear clearance to reinstall in place or reinstall prior to final positioning of the
cabinet.
6.
Unscrew the 8 screws on the bottom front access panel. Remove the pa nel.
RadioRouter Base Station Indoor Installation Guide © 2005 Flarion
Flarion Proprietary and Confidential
Page 3-2