User's Manual

Installing the Cabinet
Chapter 3. Installing the Cabinet
The base station cabinet is shippe d assembled, shrouded in cardboa rd, and mounte d on a shipping
pallet. The pallet is 35” L x 30” W x 6.75” H.
WARNING:
THE RAD IOROUTER BASE STATION INDOOR CABINET WEIGHS
APPROXIMATELY 650 LB AND IS TOP HEAVY. CARE MU ST BE TAKEN
TO HANDLE THE CABINET PROPERLY WITHOUT DANGER TO THE
INSTALLATION P ERSONNEL OR OTHER NEARBY EQUIPMENT.
Equipment that can be use d to move the base station is described in Chapter 1. Ov erview.
3.1. Removing the Cabinet from the Pallet
When this procedure is com plete d , the cabinet will be free to be moved directly into place.
Alternatively, the cabinet c an be plac ed onto a f lat dolly and moved through narrow equipment
aisles.
1.
Remove the cardboard shroud and discard.
2.
Inspect the cabinet for d am age. If there is a ny damage, f ill out the Punchlist in . If t he
damage is minor and does not prevent continuation of the installation procedur es, continue
with the installation. If the dam age prevents continuation of the installation, c ontact the
Project Ma nager for instructions.
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 3-1