User's Manual

Preparing the Floor
2.2. Preparing the Floor
Before the cabine t can be plac ed into position, mounting holes must be drilled into the floor.
There are a total of 8 clearanc e holes in the base of the cabinet — 2 in each corner. Figure 2-1:
Clearance Holes in Cabinet Base — Schematic View shows the positioning of the holes.
Figure 2-1: Clearance H oles in Cabinet Base — Schematic View
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 2-3