User's Manual

Overview
Chapter 1. Overview
The RadioRouter
®
Base Station Installation Guide covers all of the nec essar y information
required to physically install the RadioRouter base station hardware. This guide assum es t ha t a
suitable site has already been prepared. A checklist is provided i n Chapter 2. Verifying the Site
Preparation to assess the site prior to installation.
Once the physical installation is complete, the base station can be configured and comm issioned.
Instructions for the configuration process can be found in the RadioRouter
®
Base Station
Commissioning Guide.
1.1. Base Station Characte ris tics
The R a dioRouter indoor base station has the physical characteristics shown in Figure 1-1:
RadioRouter Base Station Characteristics.
Standard EIA 19 inch rack mount
38 U of electronics mounting height
71" H x 24" W x 26.5" D with door and back panel installed
71" H x 24" W x 24.5" D without door and back panel installed
631 lbs with door and back panel installed
559 lbs without door and back panel installed
Inherent forced air cooling
Front access required only for maintenance
Welded steel construction
Antenna cable connectors on top 7/16" DIN female
Power cable and backhaul entry from top
Figure 1-1: RadioRouter Base Station Characteristics
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.7
Page 1-1