User's Manual

Chapter 2
2.2.2.5 Enabling and Disabling the FPC 1000
To end a wireless broadband connection without shutting down the PC, click
Options⇒Disable. To begin another session, click Options⇒Enable.
Certain operating systems act differently when the “Enable” or “Disable” function is
selected:
• Windows 2000/XP
o Enable
: When searching for the connection, the Flarion Mobility Manager
displays "Ready/Searching". When the connection is found, the Mobility
Manager displays "Ready/Connected"
o Disable
: The Flarion Mobility Manager displays "Disabled"
• Windows 98 SE
o Enable
: When enabled, the Flarion Mobility Manager displays
"Ready/Searching" when it is searching for a connection and
"Ready/Connected" when the connection is found.
o Disable
: The Mobility Manager displays "Ready/Idle”
Note:
In Windows 98 SE, when the Mobility Manager is disabled, and then the
notebook PC enters hibernate/standby mode, the status remains disabled.
However, when the PC returns from hibernate/standby mode, the Mobility
Manager search and connection automatically resumes. If disable is still
desired, once again initiate the disable function (Tools
⇒ Disable).
Flarion FPC 1000 Wireless Network Card User Guide  2004 Flarion
Page 24 Flarion Proprietary and Confidential