Filter Selection Guide

13
1.800.637.2803
Calculating Custom Filter
Sizes
1. Measure “A” (Width of Filter) in inches and enter this measurement in space “A” below
2. Measure “B” (Height of Filter) in inches and enter this measurement in space “B” below
3. Measure “C” (Depth of Filter) in inches and enter this measurement in space “C” below
Follow these Instructions to determine Custom Filter Size
Step 1: Compute the Gross Area (Sq. In.)
Step 2: Choose Depth based on “C” (as noted above)
Step 3: See the “Custom Filter Size
Step 1: Compute the Gross Area (Sq. In.)
Step 2: Choose Depth based on “C” (as noted above)
Step 3: Choose Single or Double based on Longest side:
- If longest side is 30” or less, See Single Column
- If longest side is greater than 30”, See Double Column
Step 4: See the “Custom” Filter List Price Pages for ordering
Follow these Instructions to nd the Custom Filter Size and Price
Depths Available:
1”, 2” and 4”
“C”
How To Compute Gross Area Square Inches
Multiply “A” x “B” = Gross Area (Sq. Inches)
“A” _______ X “B” ________ = ______ “Gross Area Sq. Inches”
Enter the custom lter size in inches:
Note: Must include measurements on lines A, B and C to complete order.
“A” ________ “B” _________ “C” ______
Width Height Depth
Example: A =8 inches and B= 20 inches
8 x 20 = 160 Sq. In.
EZ Flow Filter or the PrePleat 62RM11
PrePleat 40
Note: Custom size lters are manufactured to a 1/8” undercut from Nominal size on width and height.