Owner's manual

Original System Removal
1) For safety, disconnect your battery.
2) Before disassembly measure from zirc to zirc on the outer tie rod ends. Write this dimension down
for future reference.
Before disassembly measure from zirc to zirc on the outer tie rod ends
4
Flaming River Industries
1-800-648-8022
FRxxxx Rev.A
01/05/11
3) Remove the bolt that retains the coupler
to the factory steering column shaft.
 Spreadtheangeandthenremovethe
rag joint from the car.
4) Remove the bolt that retains the rag joint
to the factory steering box. Spread the
 angeandthenslidetheshaftoffofthe
steering box and remove the shaft from the
car.