Manual

Bleeding the System con’t
73-87 C-10 Truck
Power Steering Rack and Pinion Cradle Kit
04/22/10
14
Install your power steering lines
to the correct pressure or return
ports.
See picture to the right.
FR1610 Power Steering Line Kit is
Available Separately
If using a stainless line kit follow the
instructions that are included in your kit.
Al
ways consult your factory manual for proper torque settings for your vehicle.
N
OTE: If the fluid is extremely foamy, let the vehicle sit for a few minutes and repeat steps 1-5.
N
OTE: Trapped air in the system will cause a milky appearance in the fluid. Trapped air will also cause the fluid level to rise in
the reservoir when the engine is not running.
Torque Specs
Cradle to Frame Mounting Bolts
7/16” Moun
ting Bolts 50-65 ft lbs
3/8” Mounting Bolts 40-45 ft lbs
Outer Tie Rod Ends to Spindle 30-40 ft lbs
Universal Joint Set Screws 25 ft-lbs