Instructions / Assembly

9
Your fire pit requires periodic maintenance to keep it in good running order. Follow the steps below to ensure
your appliance will provide you with the best possible performance:
1. Keep your fire pit out of the rain and store it in a dry place.
2. This device has been engineered to provide the maximum amount of heat and comfort. If you
experience any signs of your propane cylinder 'freezing off’ or start to experience lower flames than
usual, please simply turn the burner contr
ol setting to low for 5-10 minutes, or replace the cylinder with
a full one.
3. Ensure that you clean the bowl of your fire put after every use to keep it looking GREAT. Simply wiping
the outer edge of the fire pit with a damp paper towel or cloth to remove any combustion particulates.
Important Notes:
 Expected burn time; the anticipated burn time for your fire pit using a full 20 lb. (9kg) propane cylinder
is between 7 and 11 hours depending on where the flame height is set.

We recommends that you ignite this unit only when safely placed on a non- combustible surface. This is
NOT a toy. Children should be supervised at all times when using this unit without exception.
 Do not place any objects other than supplied rocks inside the burner component of the fire pit.

Do not add wood or any other materials to the fire.
 It is designed to safely combust propane only.

Do not connect to a remote gas supply.

Do not use this appliance if any part(s) have been under wat
er. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas control,
which has been under water.
 Do not leave this appliance in the rain.
Part List:
No. Picture Parts Qty N
o.
Picture Parts Qty
1
Metal lid 1 4 10ft hose 1
2
Fire bowl with 10ft
Hose
1 5 Tank stabilizer
ring
1
3 Fabric handle 1 6 Lava rock stone
6
If you need any help or need any replaced parts, please contact supplier [e-mail].