Instructions / Assembly

2
LP Safety:
a. Do not store spare LP-gas cylinders under or near the fire pit appliance.
b. Never fill the cylinder beyond 80 percent full.
c. If the information in “a” and “b” is not followed exactly, a fire causing death or serious
inquiry may occur.
Do not use this appliance under overhead combustible surfaces.
MINIMUM CLEARANCES:
Bottom: Non-Combustible Surface
Top: 80 Inches or greater
Sides: 36 Inches or greater
For installation on (or over) non-combustible floors only.
Maximum Output: 58,000 BTU/Hr (17.0kW)
Maximum Gas Supply Pressure: 250 PSI
The minimum inlet gas supply pressure for the purpose of input adjustment: 25PSI
This appliance shall be used outdoors only in well ventilated space and shall never be used in
building, garage or any other enclosed area’s.
When appliance is not in use, the gas cylinder as well as appliance must be turned off.
Indoor storage of this appliance is permissible only if the gas cylinder is disconnected and
removed from the appliance.
Gas cylinders must be stored outdoors in a wall-ventilated area out of reach of children.
Disconnected gas cylinders must have threated valve plugs tightly installed and must not be
stored in a building, garage or other enclosed areas.
The gas pressure regulator provided with this appliance must be used, and must be the same
model as supplied with the appliance.
The gas cylinder supply system must be arranged for vapor withdrawal.
Gas cylinders used with this appliance must have a collar to protect the cylinder valve.
An approved LP-cylinder stabilizer, such as the stabilizer ring included, must be utilized when
the appliance is in use.