Instruction Manual

20 www.ama.pt
ANOMALIES AND REPAIR
In case of malfuncon, please take the
appliance to an authorized Technical
Assistance Service. Do not aempt to
disassemble or repair the appliance, as this
may be dangerous.
PROTECTING THE ENVIRONMENT
This symbol indicates the
separate collecon of electrical
and electronic equipment.
The main objecve of the
separate collecon of this
waste is to reduce the quanty
to be disposed of, promote re-
use, recycling and other forms of recovery
in order to reduce its negave eects on
the environment.
When it is no longer in use, this appliance
must not be disposed of together with
other unsorted municipal waste.
The user is responsible for delivering it
free of charge to the selecve collecon
facilies available for that purpose.
Pieces of equipment that are no longer in
use can also be taken back at points of sale,
by purchasing new pieces of equipment
that are equivalent and have the same
funcons.
For more detailed informaon on collecon
points, please contact your City Council or a
point of sale for this equipment.
Descaling
Note: it is recommended that you descale
the machine no more than every 6 weeks.
The frequency depends on the type of
water used and the frequency of use.
Fill the water tank with descaling soluon
up to the maximum mark.
Select any lter to place in the lter holder.
Posion the lter holder in the machine.
Place a container underneath the coee
spout and steam pipe.
Turn the switch to the steam posion and
press the START buon for 5 seconds.
The machine will start descaling the
steam system for about 5 minutes. During
descaling, the red and blue lights of the
START buon blink alternately. When the
cycle ends, the blue START buon light
blinks.
Turn the switch to the coee posion. The
machine will start descaling the dispensing
system for about 5 minutes. When the
cycle ends, the blue START buon light
illuminates.
Pour the remaining soluon from the water
tank. Rinse the tank and add clean water up
to the maximum mark; put the tank back in
the machine.
Press the START buon to start cleaning
the dispensing system for 1 minute. During
cleaning, the red and blue lights blink twice,
alternately. When the cycle ends, the blue
light blinks.
Turn the switch to the steam posion and
press the START buon to start cleaning
the steam system for 1 minute. When the
cycle is complete, the machine will return
to standby mode and is ready for use.