GPSBT560 User Manual GPS Bluetooth Receiver User Manual Model:GPSBT560 .
GPSBT560 User Manual Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited. The company reserves rights to make any changes and improvements to the product described in this document without prior notice. Safety z Use the charger that comes with package. z Caution, risk of explosion if battery is replaced by an incorrect type.
GPSBT560 User Manual radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
GPSBT560 User Manual 1. 1.1 1.2 1.3 1.4 1.5 1.6 2. INTRODUCTION .................................................................................................................................5 GLOBAL POSITION SYSTEM (GPS) TECHNOLOGY ................................................................................5 BLUETOOTH TECHNOLOGY ..................................................................................................................
GPSBT560 User Manual 1. Introduction Combining both GPS and Bluetooth technologies, Flaircomm’s GPSBT560 receiver allows you to determine your current geographic location and direction anywhere. It communicates in real-time with Bluetooth-enabled devices such as PDAs, Smart Phones, Computers, and other devices to provide locations information for navigation applications. This battery-powered portable device can be easily placed on the car or carried by the user. 1.
GPSBT560 User Manual 1.4 Product Features z GPS Compact GPS Bluetooth receiver with completed GPS functionality Compatible with any GPS navigation software using NMEA-0183 (V3.1) standard format GPS data 16 C/A-code tracking modules with 4 correlators each Default (None) or Programmable WAAS/EGNOS DGPS Source Cold/Warm/Hot Start Time: 46/34/5 Seconds High signal acquisition sensitivity at -145dBm and tracking sensitivity at -150dBm Superior geo-location accuracy: CEP50 for 1.
GPSBT560 User Manual 1.
GPSBT560 User Manual 2. Using Your GPSBT560 Receiver GPSBT560 shall is designed mainly for outdoor applications to allow reception of GPS signals. Since the GPS antenna is placed under the front cover. For better signal reception, you shall always place the device facing up to the open sky. You shall also avoid any metal obstacles in the signal reception direction from the sky.
GPSBT560 User Manual 2.2 Connecting an external antenna The receiver provides an external antenna connector. Please refer to Figure 3 for connecting an external antenna. The external antenna will provide better GPS performance than the internal antenna. Figure 3 Connecting an External Antenna 2.3 Placing the receiver There is a magic sticker in our package. The receiver can be placed at any smooth surface as indicated in Figure 4. Please make sure your GPS Bluetooth Receiver is facing the open sky.
GPSBT560 User Manual The receiver can store up to 8 paired Bluetooth devices. Any one of them can be connected the receiver. However, for any give time, only one device can be connected. Detailed operation procedures are as follows: 1. Place your receiver close to a Bluetooth device, and ensure that your receiver is power off, and the device is power on. 2. Switch the receiver on by pushing up the power key, the Red LED blinks once per minute and the Blue LED blinks once per second.
GPSBT560 User Manual 3. Important Messages and Frequently Asked Questions 1. Red LED gives two quick blinks every minute. Low battery indicator; please recharge your battery as soon as possible. 2. Can't power up the device after charging more than 20 minutes: For the first time, the device should be charged at least 40 minute prior tuning on, it is recommended that the battery should be fully charged before using the device. 3.
GPSBT560 User Manual 4. Maintenance GPSBT560 is a well-designed communications device, careful maintenance and proper use will extend the product life. Following maintenance procedures may be helpful to you: z Always turn off power and keep your device in a safe place when it is not in use z Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids that may corrode electronic circuits.