User's Manual

BlueTone
™
BTSHS102 User Manual
. 9
6. After connected, Start “Windows Media Player” and configure the speaker interface to be “Bluetooth AV/HS
Audio”.
7. Restart “Windows Media Player” and you can listen to the music with Stereo Headset. At the same time, you can
press the button of Stereo Headset to control “play”,” pause”, choose music and Volume control.
8. If you want to use microphone which is in Stereo Headset, you must disconnect “Bluetooth AV Service”, and
connect “Bluetooth Headset Service”. Right click “BTSHS102”, and choose “Disconnect—>Bluetooth AV
Service”.
9. After disconnected, right click “BTSHS102”, and choose “Connect—>Bluetooth Headset Service”.
10. When connecting, there are some indicative tones from Stereo Headset, short press K2 “
” to receive the
connection.
11. After connected, in “Control Panel”，Start “Volume and Audio Device” and configure the record default device
to be “Bluetooth AV/HS Audio”. Then you can use microphone which is in Stereo Headset.
Notice: When connect “Bluetooth AV Service”, you can press the button of Stereo Headset to control “play”,”
pause”, choose music and Volume control, but can’t use the microphone which is in Stereo Headset. And that,
connect “Bluetooth Headset Service”, you can listen to the music and use microphone together, but can’t press the
button of Stereo Headset to do some controls.
2.3.3 Use AV Mode in your handset
If your Bluetooth handset with mp3 functionality (the handset must supports AV profile), after paired and connected
(please refer section 2.4.1 for details), start Media Player in your handset and use Stereo Headset to listen to the music.
2.3.4 AV Mode Operations
Detailed operation procedures are as follows:
Play：Short press K2, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
Pause：Short press K2, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
Stop： Long press K2, and Blue LED gives 1 blink per 3 seconds, Red LED is off.
Volume up：Short press K3, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
Volume down：Short press K4, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
Forward：Short press K5, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
Backward：Short press K6, and Blue LED gives 3 quick blinks per 2 seconds, Red LED is off.
2.4 Call Functions
2.4.1 Pairing/Connecting your Stereo Headset with Bluetooth Equipment
2.4.1.1 Pairing your Stereo Headset with Bluetooth handset
Before making and answering calls, you must pair your Stereo Headset and phone. Paring sets up a unique
relationship between your Stereo Headset and your handset. The handset will memorize the Stereo Headset’s unique