BlueTone™ BTSHS102 User Manual Bluetooth Stereo Headset User Manual Model：BlueTone™ BTSHS102 .
BlueTone™ BTSHS102 User Manual Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited。 The company reserves rights to make any changes and improvements to the product described in this document without prior notice.
BlueTone™ BTSHS102 User Manual Certification and Safety Approvals This product has been tested and found to comply with Bluetooth BQB requirements, part 15 of FCC rules, R&TTE Directive（99/5/EC） or CE marked requirements. Warning：Users should not make changes or modify the device in any way. Changes or modifications without expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with part 15 of the FCC Rules.
BlueTone™ BTSHS102 User Manual 1. 1.1 1.2 1.3 1.4 1.5 2. INTRODUCTION ................................................................................................................................ 5 BLUETOOTH TECHNOLOGY.................................................................................................................. 5 PRODUCT FEATURES............................................................................................................................ 5 PACKAGE CONTENT..............
BlueTone™ BTSHS102 User Manual 1. Introduction 1.1 Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA、PC, headset, mouse, keyboard, printer, etc. can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band. Within 2.
BlueTone™ BTSHS102 User Manual 1.3 Package Content BlueTone™ BTSHS 102 1 User Manual 1 Traveling Charger 1 AV Dongle (optional) 1 USB Dongle (optional) 1 USB Cable (optional) 1 1.4 Overview 2. Button K2 3. Button K3 1. Button K1 9. Earhook 5. Button K5 6. Button K6 10. Microphone 7. Charging Port 8. LED Figure 1: Overview 1. • ”, Power On/Power Off Button K1: “ ○ 2. Button K2: “ 3. Button K3: “ ＋ ”, Volume Up 4. Button K4: “ － ”, Volume Down 5. Button K5: “◄◄”, Forward 6.
BlueTone™ BTSHS102 User Manual 2. Using Your Stereo Headset 2.1 Battery Charging and Usage 2.1.1 Battery Charging This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures as follows: 1. Connect the travel charger to the power outlet. 2. Referring to Figure 2, plug the connector of the charger to Stereo Headset’s charging port to start charging.
BlueTone™ BTSHS102 User Manual 2.3 AV Mode Functions This product has AV Mode Functions with IVT and Windows Media Player. As a stereo headset, the product allows users to enjoy stereo music without bothering wire connections between the headset and a Bluetooth-enabled multimedia/music player, such as a mobile handset with MP3 functionality, i-POD, Walkman, MP3/MD/CD/DVD player, TV and computer, etc. It can also be used as a remote control of the player for selecting music pieces. 2.3.
BlueTone™ BTSHS102 User Manual 6. After connected, Start “Windows Media Player” and configure the speaker interface to be “Bluetooth AV/HS Audio”. 7. Restart “Windows Media Player” and you can listen to the music with Stereo Headset. At the same time, you can press the button of Stereo Headset to control “play”,” pause”, choose music and Volume control. 8. If you want to use microphone which is in Stereo Headset, you must disconnect “Bluetooth AV Service”, and connect “Bluetooth Headset Service”.
BlueTone™ BTSHS102 User Manual ID (or passkey). This ensures that a unique and encrypted wireless link between your Stereo Headset and handset will be used during calls. Detailed operation procedures are as follows: 1. Place your Stereo Headset close to your Bluetooth handset, and ensure your Stereo Headset is power off, your handset is power on 2. Press and hold K1 for at least 6 seconds until the Blue and Red LEDs alternate continuously.
BlueTone™ BTSHS102 User Manual 1. Long press K2. 2. Refer to handset’s manual to initiate the connection from the handset side. After disconnecting, Blue LED gives 1 blink per 3 seconds. 2.4.2 Call operations 2.4.2.1 Call Before dialing, both your Stereo Headset and handset must be power on. And you also need to ensure your Stereo Headset and handset has been linked with Bluetooth connection. Answer Call: Short press K2. Reject Call: Long press K4. End Call: Short press K2. Redial: Long press K3.
BlueTone™ BTSHS102 User Manual 2.4.2.6 Advanced Call Functions If your mobile phone has call waiting/conference functions, this Bluetooth Stereo Headset can support the function by following operations: 1. When you talk, at the same time a new call comes in: 1) Long press K3, to hold active call and accept incoming call. 2) Short press K2, to end active call and answer new call. 2. There are two calls in progress, one is active the other is hold: 1) Long press K3, to toggle hold call and active call.
BlueTone™ BTSHS102 User Manual .
BlueTone™ BTSHS102 User Manual 3. Important Messages and Frequently Asked Questions 1. Red LED blinking： Low battery indicator; please recharge your battery as soon as possible. 2. Can't power up the device after charging more than 20 minutes： For the first time, the device should be charged at least 40 minute prior tuning on, it is recommended that the battery should be fully charged before using the device. 3.
BlueTone™ BTSHS102 User Manual 4. Maintenance BlueTone™ BTSHS102 is a well-designed communication device, careful maintenance and proper use will extend the product life and keep its elite performance. Following maintenance procedures may be helpful to you： Always turn off power and keep your Stereo Headset in a safe place when it is not in use Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids which may corrode electronic circuits.
